Monday, September 30, 2019

Report on Course: the Business Simulation Essay

This report provides the Chairman of the board an analysis of the decisions and the results of the Company 1 in Period 2. The focus is given on how our company organized the process of planning in the Period 2 and I tried to critically analyze the results compared to our plans. In period 2 our company was seemed to do better than the previous period (period 1), but in my opinion period 2 was the beginning of our company’s crisis. We didn’t adhere to our differentiation strategy and we ignored our objectives. I strongly believe that if we have acted much differently and have the chance to redo the planning of the decision making of period 2 we would perform much better in all next periods. Introduction This report is an attempt of informing the chairman of the board of the Company’s 1 plans, actions and mistakes during the period 2. It starts with the analysis of the process of planning and continues with the analysis of the results compared to our company’s plans. 2) Body 2.1) Planning of the Period 2. To begin with the Price, we planned to have the same price as Period 1 ( 3,090 eur), because we knew that customers dislike changes in the price and we didn’t want to have dissatisfied customers especially when we hadn’t yet persuaded them that our product was the best in quality so we couldn’t risk losing many of them. As for our investment in Advertisement we thought that if we kept investing the same amount (7.0mEur ) as Period 1 we would own the same or bigger market share. Then about Sales force we were thinking of having 110 in that period because as the â€Å"Topsim† mentions a sales force of 110 could increase sales up to 45000 units. We decided to set the price of 2,640 for the bid that was higher than our CGM in the period 1 (; 2,270eur). We were thinking of purchasing 46,000 units of input materials and producing 50,000 units of Copy I as we were thinking that we have to be able to respond to the increase of market 1 demand (8%-10%) and to serve the bids in case we won that. After that we started thinking of cutting down the cost of the rest investments we had to do. So we thought that investing few or no money to the rest of our potential investments would be enough. So here are our thoughts of investments: 1,0mEur in CI, putting 10 people at the Copy I-old technology, 0,50mEur in Ecology of Copy I-old and 0,1mEur in Value Analysis of Copy I-old, 0 people in technology and 0,0 mEur in ecology and 0,0 in value analysis of Copy I-new, 1,0mEur in Maintenance of our Type A production lines and 0,0mEur in Rationalization of them, no new investment or disinvestment of the production lines and no new types of lines, 0,0 mEur process optimization, 0,0 mEur in training production workers, 0,0 mEur in investment in environmental plants, 0 number of recruiting or dismissal of production workers, non-salary staff costs 37%, short-term loan 15,0 mEur, long-term loans 0,0 mEur, dividends 40%, purchase of securities 0,0 mEur. 2) Body 2.2) Critically analyze the results compared to our plans. I have to mention that generally, in the most periods, as we were planning our steps we were trying to focus on the company’s objectives (; increase our employees productivity; decrease the negative ecological footprint; retain the market share>17% ) and how we would achieve those through our actions. However, in period 2 we didn’t act like our decisions and results would have a long term effect on the potential achievement of our goals, we tried a different tactic, which was cutting all investments costs extremely and maybe as we see from the results of that period and the next that was a fatal mistake for our company. Even if it seemed from the improved Net Income (compared to period 1) that we chose a good tactic it wasn’t because that move got us behind in comparison to the other companies that had chosen the differentiation strategy as well. They built a quality product unlike us that we thought only the temporary survivor of our company. Of course as we were at the beginning we were afraid not to get out of the market so we didn’t think thoroughly of our long term results. In that point of time our only concern should have been to create a product with a strong quality that would appeal most of the consumers and the price wouldn’t be for them an obstacle. Our results weren’t those we wanted in all periods, and I am quite sure that this started from the results of period 2. We pretty much failed creating a quality based (eco-friendly and flexible/tend to respond immediately at technological changes) production, our customers weren’t satisfied generally, our staff was neither and our market share was declining. I can now find many corrections to our decisions that maybe could ensure us in a long term view. First of all, I agree with the price, I think that first we had to gain some loyal customers who would appreciate our product’s quality and after that increase the price. So our results wouldn’t have changed with another price in a good way. I don’t agree now with the amount we invested in the Advertisement. I now believe that we should have put at least 1,o more mEur so that our market share would be wider. The number of sales staff was a good move and I think was enough. As i see it right now I’m not sure that we needed to sell to bids because if we had focused on our differentiation strategy then probably we wouldn’t need them and maybe we could sell all of our production to the market 1 so that our revenue would be bigger. As for CI we for sure made a severe mistake by reducing the amount of investment because CI expenditures affect Corporate Image which has an important double effect, on Customer Satisfaction (which is one of our companies objectives) and on Production Staff Motivation (which increase our employees productivity). As the business report on the industry shows our company had in Period 2 the smallest index of Corporate Image of all companies, I for sure believe that we should have put 2,0 or even 3,0mEur. Of course 10 people in technology is a really small number when thinking that a quality product don’t invest that much in R&D. They should be at least 30-34 so that we could be flexible to technological changes. By investing in technology we could reduce the overall amount of the environmental damage indicator caused by company which beside avoiding the penalty (we had to pay unless it turned 100 or more) it has a direct influence on Sales, Absenteeism of product employees, Corporate Image, Share price and Motivation of staff in production. Also, 0,5mEur in ecology isn’t enough for a quality centered Copy machine. Consumers care about the environment and ecology generally. Eco-friendliness affect their satisfaction so if we were more eco-friendly we would gain consumers appreciation and loyalty. So the more eco-friendly would be our product the merrier market share we would gain. Moreover, I believe we had had to invest in new production lines (Type C for example) because we could improve ecology index of the production lines themselves easily by replacing certain lines. And for sure 0,0mEur investment in ecological plants is totally unacceptable for the same reasons. I don’t have many objections for not investing yet in the technology, ecology and value analysis of the Copy I-new in period 2. At first we should have gained a loyal market share and then when having some kind of certainty for our product’s continuation/progress and of course enough capital to step to the next level to invest in the Copy I-new. I don’t agree with the amount of production because we weren’t well prepaered for selling that. On the other hand I would quite agree with the amount of production we had in period 2 in case we had planned more thoroughly our decisions bearing on mind our differentiation strategy maybe we could sell it. As I see our decisions now I can’t understand how we didn’t invest in training the production workers. Of course that resulted to the staff generally, shown with the attrition. Training has a positive influence on Production Staff Motivation and that would facilitate our 1st objective which is the increase of employees’ productivity. So for sure I believe we had to invest in training at least 1,5mEur. For the same reason I believe that non-salary costs should be a little higher (e.g 40%). Finally, I don’t think that the number of production workers was in that period enough (especially if we had done everything I have mentioned above), so bearing in mind all of the above neither the number of production stuff would be enough nor of course the Short-term loan. Conclusion For the Company 1 the organizing of the planning process and the decision making process in each period was a unique experience. Almost all of us were inexperienced in such an activity, even in a group work, so we were trying for the best result every time.. Even if that never came! Most of us found the whole procedure and the business game a great opportunity to realize how to use some of our already acquired knowledge and a great chance to learn many more from our colleagues and our professor. Thank you for that opportunity!

Sunday, September 29, 2019

My Favorite Restaurant

I don’t like homemade food too much so I often tend to go out to have lunch or dinner; I’m not talking about fast food, in fact I don’t like fast food that much. So the first place that always popped to my mind is the Ponto Alto restaurant; it is my favorite restaurant in town for many reasons. I visit this restaurant 2 to 3 per week; it is located on a hill in the Bahsass area in front of the sea, so you can imagine how beautiful the view is up there. This is the biggest reason why I like this restaurant the view is amazing especially during the sunset!One can sit-down and have their food while looking to its beautiful view, it is so relieving. Of course since I go there a lot the food must be great. It serves Italian food such as pasta and pizza and also large varieties of chicken and beef with its remarkable sauce. It’s not like fast-food it much closer to home food but more delicious and very healthy also. The dà ©cor and design inside are very creati ve; it has a large painting on the ceiling with cheerful colors that draws a smile on your face every time you look up and see it.Moreover, the restaurant also play many classical English and French music, which make you relax and comfortable! Lastly all the servants in the restaurant are both warm and hospitable they make you feel like at home. In conclusion, I think that Ponto Alto is the perfect place to eat and have a quite time especially if you are out with the wife or girl friend. I don’t hesitate for a second to recommend anyone to visit and try this unique restaurant.

Saturday, September 28, 2019

Comparing Coca-Cola Enterprise and Pepsi Co. Financial Management Research Paper

Comparing Coca-Cola Enterprise and Pepsi Co. Financial Management - Research Paper Example They are equally important for all, Management, Owners and prospective Investors. The first thing that attracts investors to a Company is its profitability and what the investors will get in return of their investment, as profit whether distributed or not is Profitability measures are important to company managers and owners alike. If an entity has to attract investors , the owners have to show some attractive profits to lure them into investing and for that the profitability ratios are the key. Company’s overall efficiency and performance is shown by the profitability ratios and one can easily compare financial information available for two or three companies to ensure the worth of each after making and investment. Financial Ratios used to determine the satisfaction of a Company’s Stockholders: The Return on Equity is an important ratio as it calculates the company’s earnings performance and tells the shareholders how much are they getting on every $1 of their investment (as capital) made in the company. This ratio explains the shareholders how effectively their money is being employed and getting the profits for the company each period. Shareholders, on comparing the ratios with similar companies or industry as a whole, can get the satisfaction or dissatisfaction that their monies are utilized properly and getting the desired results or not. However, it should be kept in mind while making the comparisons that there are variations in this ratio among some types of businesses. The Dividend Payout Ratio, as the shareholders are always looking for the return, not in form of figures in the financial statements but also in their hands as ready cash. This ratio indicates the dividend a company pays to its common shareholders on every $1 net profit it earns. That is how muc h of the profit is distributed by the company to its shareholders as return and how much is retained. And no matter how forward looking the shareholders are they are always looking for some materialistic return and dividend is one of those things that satisfy the shareholders the most. Guidelines to invest in one of those companies: The debt ratio gives an idea how much the Company is indebted as compared to the assets it held. That is the amount of total liability per $1 of its total assets. The more the debts are the more riskier is the company and its operations to invest in as its shows that the company is not able to pay its debts from the assets it holds if all the amount is called currently. Further it also indicates that in case of liquidation the shareholders equity would be utilized and the owners share in the assets will be reduced or nullified. Comparing Coca-Cola Enterprise and Pepsi Co, in this regard Coca-Cola Enterprise is less risky because of its 0.946 debt ratio a s compared to Pepsi Co’s 0.562. The Current Ratio highlights the liquidity of the company, higher the current ratio means more liquid the company is and that the company’

Friday, September 27, 2019

Business Report Essay Example | Topics and Well Written Essays - 2000 words - 3

Business Report - Essay Example This department coordinates the operations of the business. The aim of the firm is to maximize sales to increase revenue. Systems that are in this department include the Sales Recording System, and Business Operation System. The main functions of this department include management of transportation, inventory, warehousing, packaging, and security. Systems in this department include wholesale mode system, security management, warehousing coordination system and inventory system. This department ensures day-to-day supervision of receiving and distribution of funds within the organization. Maintenance of records if also a function here. Systems in this department include the cashier system and database recovery system. High Burry Suppliers has no computer on their premises, and all ordering takes place manually. This results to data loss. The business has no website and uses very little market except the word of mouth. HBS is on the road to becoming one of the top retailers in the country. There are various business information system that needs to be implemented to ensure this status. The first is Schedule Management System. This will help the top leadership in managing their tight schedules. Additionally, the system will be useful in the management of operations. The second is the Price Look-Up System and log-in system. This system will be useful in tracking down all the transactions within the firm. The third is the Operations Manager System. This system will be useful to the sales department since it is involved in the running of day-to-day operations. The system is crucial in making the company more productive and will work in collaboration with the Sales Supervisor System, which will be the fourth system to be implemented. The fifth system to be implemented is the Inventory System. This system will be useful in integrating information, transportation, and inventory. There are many benefits associated with this proposed information system.

Thursday, September 26, 2019

Discussion Assignment Example | Topics and Well Written Essays - 250 words - 66

Discussion - Assignment Example Apparently, people tend to mix the political ideology of people with that of the religion and tend to take into consideration the faith of candidates while deciding on whether to vote for someone or not. 1People tend to prefer to know the core beliefs of the political candidates before deciding whether to vote or not and as such Mormonism is not yet accepted at mass level. Though it is more related with the Christianity however, its core differences make it different from the mainstream Christian religion. What is however, important to note that the religion has links and proximity with all major three religions which can easily make it the mainstream religion in the country? The religion’s similarity with all major religions is its major appeal whereas its certain practices such as secrecy maintained while conducting prayers sessions is something which can be considered as not having universal appeal to many who view these practices with more

Wednesday, September 25, 2019

Legalization Of Prostitution Research Paper Example | Topics and Well Written Essays - 2000 words

Legalization Of Prostitution - Research Paper Example Nothing in the form of research on prostitution had been done before the nineteenth century, when a flurry of studies, the most famous of which by Dr. William Sanger, were published. Sanger was mainly concerned with who the average prostitute was and why she had chosen or was driven to the lifestyle. The profile showed a woman in her late teens or early twenties, usually illiterate, poor and/or from broken families (Bullough 243). Pre-dating Women’s Liberation, women of the day did not have very many options between being supported by a husband or family, or life on the streets. If one fell into poverty and had little or no education, prospects were bleak. Should a woman fall into social disgrace it seemed little difference if she took to prostitution or not; her reputation was destroyed anyway. â€Å"In his novel, Tess of the DUrbervilles, Hardy paints a different picture of a ruined maid where Tess, seduced and betrayed by an aristocratic libertine, is inevitably driven tow ards her ultimate destruction† (Bartley 1). Many families on the lower economic strata saw nothing wrong with forcing a daughter into prostitution, and many domestics, immigrants, with no money or seduced and abandoned by their rich lovers, saw no other option. (Bullough 243). On the question of should prostitution be legal, and despite Sanger’s rather dire findings, he remained a pro-legalization advocate. â€Å"...if history proves that prostitution can not be suppressed, it also demonstrates that it can be regulated, and directed into channels where its most injurious results can be encountered, and its dangerous tendencies either entirely arrested or materially weakened† (Sanger quoted on ProCon.org, para 2). To legalize or not to legalize continues to be a question that perplexes society. And those who would abolish it, as well as those

Tuesday, September 24, 2019

Ethical use of information technology Article Example | Topics and Well Written Essays - 250 words

Ethical use of information technology - Article Example Federal Intelligence Organization and for shattering the integrity and privacy of the U.S. Air Force website (Chellel 1). In May 2013, they were jailed as these reputable organizations suffered with hefty losses of reputation and money due to these hackers. In jail, Ackroyd was truly guilty and felt extremely embarrassed for what he did and how badly he used his gifted skills (Chellel 1). He decided to correct all his mistakes when he gets out of jail, and use his natural blessing of ability to hack for the goodwill of his nation and people. But, he was still doubtful if life would give him another chance and he would get any opportunity to be a part of the respectable society and study further, ever. Ackroyd’s imprisonment period was shortened to nine months. When he was released out of jail in February, his good intentions helped him and he succeeded in getting admission at Sheffield Hallam for a Masters qualification in the field of Information Systems Security (Chellel 1). It was not late after, when he again got a big chance to prove his skills, but now for a good purpose. His role became active when companies direly demanded ethical hacking, due to flooding in of cyber security. Companies lacked the immediate expertise required to protect their business from drowning in the floods of cyber security. LulzSec’s hacking activities against Pay Pal and Mastercard Inc. were observed at a hype when they rejected WikiLeaks to operate for their payments from their platform. These companies got highly alert when Wikileaks dispatched all military confidential information. LelzSec’s members conducted their activity by recording FBI conversations, uploading all secret info and false claims on YouTube. They became a great threat for the nation. Ackroyd has a heroic role in this act. Server obstacles and hidden patterns were always a thrill for Ackroyd (Chellel 1). With his nature of taking the hidden as a challenge and going deep down, Ackroyd

Monday, September 23, 2019

Germany 1789-1900 Research Paper Example | Topics and Well Written Essays - 1000 words

Germany 1789-1900 - Research Paper Example Despite the endowment, a rift between the high class and lower class prevailed leading to divergence, apparent contradiction, and violent collision of thoughts. The contest for recognition and right of control promulgated a series of unconnected struggles hence the birth of movements including the German confederation. The paper is a discussion on the different revolutionary and independence movements from 1789 to 1900 In the mid nineteenth century, cultural, social and economic tensions rose between Germany and other parts of Europe. The shear problems had reached a crisis stage and each section was looking for backdoor solutions that favour their interest. Undeniably, political reality was fast becoming unavoidable; however, the industrial revolution worsened the situation (Meuschel 21). The industrial revolution brought a series of signs, as the democratic changes threatened the survival of existing government, a factor that needed further scrutiny. Several democratic principles including independence of the judiciary, press freedom and representation in the legislature was fast becoming a problem (GÃ ¶rner 61). With the promises coming and going an acceleration of liberal movements gained stage. From January-February 1848, a revolt in Paris led to overturn of King Louis Philip, a situation that triggered Germany to explode. It began with an uprising from peasant revolts in the Baden and Bavar ia. Notably, the wavelike revolution spread down to Rhine land and ultimately to military head of Prussia (Berlin). At this point, it started becoming a problem putting pressure on the ruling government. Being so strong, many monarchs agreed to installation of basic democratic requirements (Peterson 46). In response, the intellectual fathers and leaders of the revolution met in Heidelberg, to ensure fruits from the revolution land in the right hands. A follow-up meeting in Frankfurt led to

Sunday, September 22, 2019

The Criteria Used to Make Judgments in Evaluative Teaching Observation Research Paper

The Criteria Used to Make Judgments in Evaluative Teaching Observation - Research Paper Example The teacher noted that there were formatting issues with my PowerPoint that could be improved and that there was a spelling mistake. Again, these are issues that can detract from my lessons, so I was glad to get this feedback so that I can improve the formatting and fonts on my PowerPoint in later presentations. The observers did feel that I had good communication skills, and was approachable as a teacher, so I was happy to get this feedback as well. It seemed that the main areas for improvement were technical issues that can be easily fixed, as opposed to my overall teaching style, so it made me realize that my overall style of teaching is good. I just need to work on my technical issues, including my issues with formatting PowerPoint. These all focus upon the practice as a teacher, so in this paper, this will be the focus. I will also focus, in this paper, the explicit and implicit criteria that is used in evaluative teaching, and I will conclude by making recommendation for improv ing the process of teaching observation by focusing on making explicit the criteria by which judgments are made and empowering observer and observe to be in control of the feedback process. My teaching observations were in line with the research on the topic. Donnelly (2007) notes that peer observation of teaching is a necessary component for good practice in teaching and that dialogue and open debate are encouraged, and risk-taking is supported in teaching. Although I didn’t necessarily take risks with my teaching, when I was being observed, I did notice that there was a good dialogue between myself and my observers. They were more than happy to let me know when they liked something that I was doing, or if they thought that something needed to be improved upon, and this dialogue was very stimulating and enlightening. I also note that Gosling (2002) identified three different types of observations in teaching – evaluation, development and peer review. The evaluation is conducted by superiors and is a formal assessment of one’s competencies. This might take the form of annual appraisals and is used to manage employees. Development is used not to manage employees, but to give an overall overview of one’s teaching competencies. This is also conducted by a superior, and this review is also formal. The third kind, the peer review, is much less formal. This is observation and discussion, and the feedback, while critical, is considered to be non-judgmental and constructive. This takes place only in an atmosphere where both parties are genuine peers, and there is not a power imbalance between the two, and there are a mutuality and respect for one another. My experience definitely falls under the third assessment, as the observation was not a formal one, and there was not a formal assessment of my skills. It was non-judgmental and very gentle criticism that was extremely constructive. Moreover, the observation was truly a peer observation, w hich was helpful.

Saturday, September 21, 2019

Tristan Bernards Im Going Essay Example for Free

Tristan Bernards Im Going Essay According to The Hutchinson Unabridged Encyclopedia literature is, â€Å"Words set apart in some way from ordinary everyday communication. In the ancient oral traditions, before stories and poems were written down, literature had a mainly public function mythic and religious. As literary works came to be preserved in writing, and, eventually, printed, their role became more private, serving as a vehicle for the exploration and expression of emotion and the human situation. † Literature enables us to develop our minds analytically and promotes open minds. We can see the world through the eyes of different writers from different cultures and in turn learn to better handle certain scenarios in our own lives. It allows the reader to escape to a different world temporarily. In Tristan Bernard’s I’m Going! , it shines a light on an issue that is true with many couples all over the world and in all times. I liked it for the fact that is like a genre of comedies with a social message. This play is relatable to many people in the world. Unlike other works in our textbook, this play seems to have a specific issue that many couples relate to, lack of communication. In this paper, I will critique parts of this works using the reader’s response approach, the lacks of communication brought upon by the main characters and support it with evidence. I always understood the fact that we humans are essentially the same everywhere in the world. We have similar ambitions and dreams. We want and hope for mostly the same things for our families and us. I was intrigued by Bernard’s play, I’m Going! As it shows us clearly how not only couples dynamics are similar but even that most couples mistakes and arguments are similar as well. In this case, the lack of communication comes across in every point made by Henri and Jeanne. It shows us a satirical look on how communication should be effective and the misunderstandings that keep occurring with this couple. Their ineffective communication could lead to a horrible life and a game of cat and mouse that seems endless. (Clugston, 2010) I have seen many Henris’ and Jeannes’ throughout my growing up and the solution seemed always to be clear to all, except to the couple in question. In the play, Henri would never admit his obsession and addictions to his wife Jeanne. Due to the nature of their relationship, it seems his pride won’t let him open up to his partner. Instead, he tries to keep a persona that is much stronger and able than he is. Jeanne, on the other hand, does not have a clue how to persuade her husband to spend more time with her as well as abandon the habit of gambling and going to the races so often. They clearly avoid the subject until it’s time for the race again. Jeanne exhibits some fear of her husband, as well as not knowing what to do, when Henri states any excuse to have an argument avoiding the true problem. He states all the fake issues and fake reasons†¦Jeanne’s fast walk, the financial cost of her joining him to watch the races, and even the weather, all in an attempt to persuade Jeanne not to go with him. On the other hand, Jeanne does not seem to know how to face her husband or convince him reasonably why he should not go to the races anymore. She tries delicately to make it about her and his lack of effort to spend time with her. The reality is that Henri needs time for himself like everybody and needs to quit these races as a responsible head of family should know. On line 157 of I’m Going, Henri shows that us that he does love his wife but that he also is trying to outsmart her by saying just enough to keep her quiet on the matters at hand so he can enjoy the races with no consequences at home or on his own conscience. (Clugston, 2010) I like this play and the subject matter brought up. I did wish, however, to see more comedic lines to make the point even stronger. Lack of communication could be the demise of any couple in the long term and that message could have been even more emphasized. I believe this play pointed at one of the most dangerous issues couples go through in all times and places. This play reinforces the importance of communication and the importance of opening up to your other half and partner in life is a necessity. Since the first chapter, our textbook has asked us to â€Å"connect† with literature. It was asked of us to find a personal link to a story, poem or play. While examining I’m Going, I chose the reader response approach. This approach encourages, through the use of specific prompts, the readers to have personal interactions with the text, personal experiences and prior knowledge. (Kelly, 1989) This comedy uses the imagination and humor in a very smart way. It forces us to open our mind and heart to an issue that not all couples are even able to pin point. Humor can educate us about very serious matters that other types of art, schools or even life experiences may not be able to get through. With Henri and Jeanne’s ineffective communication, it brings to light other issues instead of the one at hand. They focus on other issues but if they focused on communication, they may be able to repair their relationship. Without acknowledgement of the true issue, only time can tell how long they can make it last.

Friday, September 20, 2019

Introduction To Air Conditioning

Introduction To Air Conditioning Air conditioners and refrigerators work the same way. Instead of cooling just the small, insulated space inside of a refrigerator, an air conditioner cools a room, a whole house, or an entire business. Air conditioners use chemicals that easily convert from a gas to a liquid and back again. This chemical is used to transfer heat from the air inside of a home to the outside air. The machine has three main parts. They are a compressor, a condenser and an evaporator. The compressor and condenser are usually located on the outside air portion of the air conditioner. The evaporator is located on the inside the house, sometimes as part of a furnace. Thats the part that heats our house. The working fluid arrives at the compressor as a cool, low-pressure gas. The compressor squeezes the fluid. This packs the molecule of the fluid closer together. The closer the molecules are together, the higher its energy and its temperature. The working fluid leaves the compressor as a hot, high pressure gas and flows into the condenser. If we looked at the air conditioner part outside a house, look for the part that has metal fins all around. The fins act just like a radiator in a car and helps the heat go away, or dissipate, more quickly. When the working fluid leaves the condenser, its temperature is much cooler and it has changed from a gas to a liquid under high pressure. The liquid goes into the evaporator through a very tiny, narrow hole. On the other side, the liquids pressure drops. When it does it begins to evaporate into a gas. As the liquid changes to gas and evaporates, it extracts heat from the air around it. The heat in the air is needed to separate the molecules of the fluid from a liquid to a gas. The evaporator also has metal fins to help in exchange the thermal energy with the surrounding air. By the time the working fluid leaves the evaporator, it is a cool, low pressure gas. It then returns to the compressor to begin its trip all over again. Connected to the evaporator is a fan that circulates the air inside the house to blow across the evaporator fins. Hot air is lighter than cold air, so the hot air in the room rises to the top of a room. There is a vent there where air is sucked into the air conditioner and goes down ducts. The hot air is used to cool the gas in the evaporator. As the heat is removed from the air, the air is cooled. It is then blown into the house through other ducts usually at the floor level. This continues over and over and over until the room reaches the temperature we want the room cooled to. The thermostat senses that the temperature has reached the right setting and turns off the air conditioner. As the room warms up, the thermostat turns the air conditioner back on until the room reaches the temperature. Any system that loours temperature operates in similar fashion. First we take a gas, like Freon, and place it in a sealed system. This freon is then pressurized using a compressor. As its pressurized, it gets hot by absorbing the heat around it. This hot gas is then circulated through a series of tubes that dissipate the heat. Scientifically, the gas removes heat rather than adds cold, but thats a lesson in physics that doesnt really matter to us right now. The gas can lose lots of its heat, in other words it gets really cold, when we reduce the pressure. As it cools it becomes a liquid. This is when we get cold air blowing on wet sweaty forehead. To use this system in a car, it needed very little adaptation from its early applications as a refrigeration device. since it was discovered that Freon (R-12) was harmful to the earths Ozone layer, its been phased out for automotive use, and replaced with the slightly less efficient, but harmless R-134a refrigerant. This is actually good news because for years it was against the law to service our own air conditioning system without a license. Now that the refrigerant is safer, we can all work on our own A/C systems again! Some cars have not been converted from the old R12 to R-134a, but this conversion can be done easily. 2.1 WORKING OF AIR CONDITIONER 2.1.1 COMPRESSOR The air conditioning compressor is the refrigerant pump of the air conditioning system. The compressor compresses refrigerant inside the system and circulates it to the condenser and then to the evaporator. The evaporator is where the pressurized refrigerant is released, causing a drop in pressure resulting in a cold evaporator, the low pressure refrigerant is then returned to the compressor to be re-pressurized. The air conditioning compressor is driven by a drive belt that is pooured by the engine and can be engaged and disengaged by an electromagnetic coil on the front of the compressor (Fig.2.1). To maintain the efficiency of the air conditioning system the compressor drive belt should be checked regularly. If it is worn out or degenerated it should be replaced. The systems hoses should be checked for deterioration, bubbles, cracks and hardening or oily residue, all could be signs of leakage. The correct refrigerant charge should always be maintained, low system refrigerant charge is a common cause of a weak AC system. Odors can developed in the air conditioning system when a fungus has grown on the evaporator core. Warm damp surroundings provided the perfect breeding ground for fungus, which grows with moisture. Aerosol disinfectants can be used to remedy this condition. While the air conditioner system is running on the full high setting with recirculation feature activated, spray a disinfectant (Lysol, Ozium) into the inlet of the ac system (under the dash on the passengers side), be aware whatever we spray will come out of the upper vents, so we may not want our face in front of any vents when doing this procedure. Odors can be prevented from returning by repeating this procedure periodically throughout the summer months. This is the heart of our a/c system. The compressor is what takes the refrigerant (the gas) and pressurizes it so it will cool the air. Its run by an engine belt. The compressor also has an electrically operated clutch that turns the compressor on and off as we demand more coo l air. 2.1.2 CONDENSERS This is the area in which heat dissipation occurs. The condenser, in many cases, will have much the same appearance as the radiator in we car as the two have very similar functions. The condenser is designed to radiate heat. Its location is usually in front of the radiator, but in some cases, due to aerodynamic improvements to the body of a vehicle, its location may differ. Condensers must have good air flow anytime the system is in operation. On rear wheel drive vehicles, this is usually accomplished by taking advantage of our existing engines cooling fan. On front wheel drive vehicles, condenser air flow is supplemented with one or more electric cooling fan(s) (Fig.2.2). As hot compressed gasses are introduced into the top of the condenser, they are cooled off. As the gas cools, it condenses and exits the bottom of the condenser as a high pressure liquid. The condenser is like a miniature radiator, usually mounted at the front of the car right next to our big radiator. Sometimes the condenser will have its own electric cooling fan, too. The hot, compressed air passes through the condenser and gets lots cooler. As it cools, it becomes a liquid 2.1.3 EVAPORATOR Located inside the vehicle, the evaporator serves as the heat absorption component. The evaporator provides several functions. Its primary duty is to remove heat from the inside of our vehicle. A secondary benefit is dehumidification. As warmer air travels through the aluminum fins of the cooler evaporator coil, the moisture contained in the air condenses on its surface. Dust and pollen passing through stick to its wet surfaces and drain off to the outside. On humid days we may have seen this as water dripping from the bottom of our vehicle. Rest assured this is perfectly normal (Fig. 2.3). The ideal temperature of the evaporator is 32 Fahrenheit or 0 Celsius. Refrigerant enters the bottom of the evaporator as a low pressure liquid. The warm air passing through the evaporator fins causes the refrigerant to boil (refrigerants have very low boiling points). As the refrigerant begins to boil, it can absorb large amounts of heat. This heat is then carried off with the refrigerant to the outside of the vehicle. Several other components work in conjunction with the evaporator. As mentioned above, the ideal temperature for an evaporator coil is 32 F. Temperature and pressure regulating devices must be used to control its temperature. While there are many variations of devices used, their main functions are the same; keeping pressure in the evaporator low and keeping the evaporator from freezing; A frozen evaporator coil will not absorb as much heat. The evaporator is another little radiator that does just the opposite task as the condenser. As the super-cool liquid is passed t hrough its tubes, air is forced through and gets really cold, right before it hits our face. As it warms up again, the refrigerant starts turning back into a gas. 2.1.4 THERMAL EXPANSION VALVE Another common refrigerant regulator is the thermal expansion valve, or TXV. Commonly used on import and aftermarket systems. This type of valve can sense both temperature and pressure, and is very efficient at regulating refrigerant flow to the evaporator. Several variations of this valve are commonly found. Another example of a thermal expansion valve is Chryslers H block type. This type of valve is usually located at the firewall, between the evaporator inlet and outlet tubes and the liquid and suction lines. These types of valves, although efficient, have some disadvantages over orifice tube systems. Like orifice tubes these valves can become clogged with debris, but also have small moving parts that may stick and malfunction due to corrosion.(Fig .2.4) Flow control, or metering, of the refrigerant is accomplished by use of a temperature sensing bulb filled with a similar gas as in the system that causes the valve to close against the spring pressure in the valve body as the temperature on the bulb increases. As temperatures in the evaporator decrease, so does the pressure in the bulb and therefore on the spring causing the valve to open. An air conditioning system with a TX valve is often more efficient than other designs that do not use one. A thermal expansion valve is a key element to a refrigeration cycle; the cycle that makes air conditioning, or air cooling, possible. A basic refrigeration cycle consists of four major elements, a compressor, a condenser, a metering device and an evaporator. As a refrigerant passes through a circuit containing these four elements, air conditioning occurs. The cycle starts when refrigerant enters the compressor in a low pressure, low temperature, gaseous form. The refrigerant is compressed by t he compressor to a high pressure and temperature gaseous state. 2.1.5 RECIEVER-DRIER The receiver-drier is used on the high side of systems that use a thermal expansion valve. This type of metering valve requires liquid refrigerant. To ensure that the valve gets liquid refrigerant, a receiver is used. The primary function of the receiver-drier is to separate gas and liquid. The secondary purpose is to remove moisture and filter out dirt. The receiver-drier usually has a sight glass in the top. This sight glass is often used to charge the system. Under normal operating conditions, vapor bubbles should not be visible in the sight glass. The use of the sight glass to charge the system is not recommended in R-134a systems as cloudiness and oil that has separated from the refrigerant can be mistaken for bubbles. This type of mistake can lead to a dangerous overcharged condition. There are variations of receiver-driers and several different desiccant materials are in use. Some of the moisture removing desiccants found within are not compatible with R-134a. The desiccant ty pe is usually identified on a sticker that is affixed to the receiver-drier. Neour receiver-driers use desiccant type XH-7 and are compatible with both R-12 and R-134a refrigerants. The ac receiver drier is used to take all of the water out of the ac system, and to take out any contaminants that may plug the ac system. The ac receiver drier should be changed every time we remove any ac component that exposes the sealed ac system to the atmosphere. (Fig. 2.5) The ac receiver drier is typically located in the engine compartment and has 2 hoses connected to it. There also may be a low-pressure switch attached to the receiver drier as well. For convenience some ac receiver driers have a small window on the unit to allow we to see if the air conditioning system is fully charged. Simply turn the ac system on high, wait a few minutes and look at the small window. We should not see any bubbles passing thru the receiver drier. 2.1.6 ACCUMULATORS Accumulators are used on systems that accommodate an orifice tube to meter refrigerants into the evaporator. It is connected directly to the evaporator outlet and stores excess liquid refrigerant. Introduction of liquid refrigerant into a compressor can do serious damage. Compressors are designed to compress gas not liquid. The chief role of the accumulator is to isolate the compressor from any damaging liquid refrigerant. Accumulators, like receiver-driers, also remove debris and moisture from a system. It is a good idea to replace the accumulator each time the system is opened up for major repair and anytime moisture and/or debris is of concern. Moisture is enemy number one for our A/C system. Moisture in a system mixes with refrigerant and forms a corrosive acid. When in doubt, it may be to our advantage to change the Accumulator or receiver in our system. While this may be a temporary discomfort for our wallet, it is of long term benefit to our air conditioning system. An accumul ator can maintain the pressure in a system for periods when there are slight leaks without the pump being cycled on and off constantly. When temperature changes cause pressure excursions the accumulator helps absorb them. Its size helps absorb fluid that might otherwise be locked in a small fixed system with no room for expansion due to valve arrangement.(Fig.2.6) The gas precharge in an accumulator is set so that the separating bladder, diaphragm or piston does not reach or strike either end of the operating cylinder. The design precharge normally ensures that the moving parts do not foul the ends or block fluid passages. Poor maintenance of precharge can destroy an operating accumulator. A properly designed and maintained accumulator should operate trouble-free. 2.1.7 ORIFICE TUBE The orifice tube, probably the most commonly used, can be found in most GM and Ford models. It is located in the inlet tube of the evaporator, or in the liquid line, somewhere between the outlet of the condenser and the inlet of the evaporator. This point can be found in a properly functioning system by locating the area between the outlet of the condenser and the inlet of the evaporator that suddenly makes the change from hot to cold. We should then see small dimples placed in the line that keep the orifice tube from moving. Most of the orifice tubes in use today measure approximately three inches in length and consist of a small brass tube, surrounded by plastic, and covered with a filter screen at each end. It is not uncommon for these tubes to become clogged with small debris. While inexpensive, usually between three to five dollars, the labor to replace one involves recovering the refrigerant, opening the system up, replacing the orifice tube, evacuating and then recharging. Wit h this in mind, it might make sense to install a larger pre filter in front of the orifice tube to minimize the risk of of this problem reoccurring. Some Ford models have a permanently affixed orifice tube in the liquid line. These can be cut out and replaced with. (Fig.2.7) 2.2 CAUSES OF AIR CONDITIONING PROBLEMS 2.2.1 INTRODUCTION Most of us take the AC in our automobiles for granted. We dont give it much thought during our daily commute. The only time we think about it is when we it starts giving us problems. But just like all the other important part of a vehicle, its AC should also be maintained properly. Especially in the cities where we get a lot of sunshine, a car without a proper AC is nothing less than a solar heater. It can be quite a punishment to travel in such a car. There can be various reasons behind a cars air conditioning problem. There are various components in it and anyone of the AC parts can create trouble. For example, if there is absolutely no cold air from the AC, then it may have one of these problems: à ¢Ã¢â€š ¬Ã‚ ¢ The fuse might be blown. à ¢Ã¢â€š ¬Ã‚ ¢ Driver belt may be broken. à ¢Ã¢â€š ¬Ã‚ ¢ There can be a blockage in the expansion valve, receiver driver or refrigerant line. à ¢Ã¢â€š ¬Ã‚ ¢ Fault or leakage in expansion valve. If we are having the problem of decreased cooling in the vehicle, then there might be a slow leak or blockage in the system that needs to be check as soon as possible. A low refrigerant charge, or a slipping AC compressor clutch can also decrease the performance of the AC. Here we must remember that minor leaks of refrigerant in some air conditioners are normal, but if the leakage increases over time, then see a mechanic immediately. Many of the neour models have external filters to keep the dust particles from reaching inside the car. But with time, these filters can also get clogged and reduce the air flow. Make sure that we clean these filters at regular intervals, especially if we live in a dusty place. If we experience a musty smell in the car than it is very much possible that mould is blocking the filter and evaporator of the Air conditioner. In such cases, the air might be cold but not cool enough and there will be a strange moisty smell inside the car. Many people might even experience allergic attacks as soon as they enter the car. Take the car to the mechanic immediately, if we suspect any mould or fungal infestation in our car AC. As we all have experienced at some point of our life, getting the AC of a car is tedious task because we have to send our cars to the mechanic for at least one or two days. This is not only very expensive, but very time consuming too. So, make sure that we keep our car in the best condition possible. Get it serviced on time and dont ignore any warning signs that our AC might be giving. Whenever we take our car on a rough and long ride, make sure that we get it serviced from a qualified mechanic afterwards. Ask the mechanic to put emphasis on the A/C compressor and its other parts 2.2.2 MAIN PROBLEMS AND CAUSES Air conditioning, which was once a great luxury, is now a common feature on most motor vehicles. While the servicing of modern car air conditioning systems is best left to professionals, we can get the most enjoyment from our ac system if we know a bit about how it works and what malfunctions we should be on the lookout for. 1. Odd smells coming from the air conditioning may be caused by bacterial buildups As our car becomes older, or when the air conditioning system is used infrequently, bacteria, micro-organisms, mold and fungi may start growing, just behind the dash panel on the evaporator causing some very unpleasant odors. Some even claim this can result in headaches and flu like symptom sometimes referred to as sick car syndrome. This problem can be solved by using an anti-bacterial treatment that destroys the bacteria growth and leaves our car smelling fresh again. 2. If we car does not feel cold enough, then we may need to recharge our system If we feel that our car doesnt feel as cold as our friends car, then our system may need servicing. The air conditioning system in our vehicle is not usually covered by most manufacturers servicing schedules and the refrigerant gas that is used to operate the system depletes over time. On average most vehicles lose up to 15% per annum. This leakage can be caused when then system is not used during the winter months. Thus allowing the small O ring seals to dry out resulting in a gradual deterioration in system performance. If this continues, eventually the system will not be able to operate at all. Most problems of this type can be put right fairly easily by a leak check of our system followed by a complete refill of our air conditioning refrigerant, this is sometimes referred to as a re-gas. 3. Running our air conditioning year round will help maintain the system If we run the air conditioning in the winter it will help to keep the system well lubricated and leak tight. This is because the refrigerant actually carries the oil that lubricates the system and most importantly the compressor. It also keeps the seals and hoses moist, thus preventing them from drying out and cracking which can lead to leaks. 4. Strange noises coming from the air conditioning should be attended to immediately. If our air-con system suddenly starts making noises we have not heard before it is very advisable to have a qualified vehicle air conditioning specialist to have a look at it. Some noises could be early symptoms of a compressor failure (the compressor is the air conditioning pump).The compressor is usually the most expensive part on the system ranging from approximately  £230 to  £600+ and if the bearings in our compressor break down or if the compressor seizes up it also means that other components can become contaminated with metal particles A flush of the system would then be needed as well as replacement of the compressor, the receiver/drier and the expansion valve quite a hefty bill! 5. Dont worry about a pool of water forming under our car after using the A/C If we see a puddle of water on the ground, usually under the passenger area dont be alarmed. This is a normal feature of the system as it is only water dripping from the air conditioning evaporator. The evaporator has a drain tube fitted to allow the condensation from the evaporator to drain away from the vehicle. 6. Excessive moisture inside the car can be fixed easily Sometimes the drain tube from the evaporator may become blocked or detached allowing the condensation to build up inside evaporator. If this occurs water will just build up inside oure car to a point where there are damp carpets or misting / high humidity type problems. These problems can be solved with low-cost servicing. 7. Have our air conditioning serviced regularly, even if there are no visible problems. Just as the other systems of our car need servicing on a regular basis, the same is true for the air conditioning system. The compressor needs oil, or else it will seize up. The filter collects debris and moisture. If the filter becomes blocked, then the performance of the system will deteriorate and it can even quit working entirely (probably when we need it most!) Normally the refrigerant gas in a car air conditioning system has to be recharged completely within four years from the manufacture date and thereafter every two to three years. An annual servicing of our cars air conditioning system will guard against malfunctions in the compressor and other vital parts of the system. Regular maintenance will save we money in the long run and guarantee we comfort in the hottest months. Vehicle manufacturers recommend servicing air-conditioning systems every two years. A fully functional system brings we several major benefits: Ensures that correct temperatures are being reached. Reduces pollen and pollution entering our car. Saves we money. Reduces the amount of chloroflurocarbons (CFCs) in the atmosphere. Increases the life of our vehicles air conditioning system. A useful tip in winter is to run the air conditioning to prevent our windscreen misting 3.1. METHODOLOGY RELIABILITY ANALYSIS FAILURE ANALYSIS 4.1. CONCLUSIONS The project report mainly deals with how an air conditioner works and explains the various working features of the air conditioner such as the working parts and then deals with the problems associated with air conditioning and the main causes of it. The project also gives an insight to the air conditioning world and how important it is to our modern day world.

Thursday, September 19, 2019

Philosophy of Education :: Philosophy of Teaching Statement

Philosophy of Education Webster defines philosophy as a critical study of fundamental beliefs and the grounds for them. In this philosophy, I will be talking about the three great philosophers: Socrates, Plato, and Aristotle. These three philosophers represent the birthplace of Western philosophy. Socrates, which is synonymous with wisdom and the philosophical life, was a teacher without a school. His goal was to help others find the truths that lie within their own minds. He helped his students reach deeper, clearer ideas by questioning, disproving, and testing the thoughts of his pupils. His teachings offended many of the powerful people of his time. They believed he was corrupting the youth in Athens. Since he believed and taught in this way, he was executed. Plato, a student of Socrates, followed in his teachings. After returning to Athens, he founded The Academy, considered by some to be the world’s first university. In Plato’s philosophy the human soul has three parts: intellect, spirit, and appetite. He felt that these three aspects interacted to determine human behavior. He urged that intellect be trained to control spirit and appetite. Aristotle was the student under Plato. He came to Plato’s Academy at the age of 18 and stayed for 20 years until the death of Plato. He went to northern Greece and taught Alexander the Great. After educating Alexander, he returned to Athens and set up his own school, the Lyceum. Aristotle placed more emphasis on the physical world than did Plato. He wrote works on biology, physics, astronomy, just to name a few. But, he is also renowned for his ethical and political theories. He thought the highest good for people was a virtuous life. By thinking this, he promoted the doctrine of the Golden Mean.

Wednesday, September 18, 2019

Merchant Of Venice - Antonio And Shylock :: Free Merchant of Venice Essays

William Shakespeare shows how two tradesmen can have completely different lives when others view them differently in the play The Merchant of Venice. In the play, Bassanio, Antonio’s friend, needs money to pursue his love. They seek a loan from Shylock, a Jewish moneylender in Antonio’s name. The contract is for three times the value of the bond in three months or else Shylock cuts off a pound of flesh from Antonio. While all this is happening, there are love plots going on. One of which is for Shylock’s daughter to elope with Lorenzo, a Christian. Later on, Antonio’s source of money, his ship, is reported sunken in the English Channel, dooming him to the loss of one pound of his flesh. There is a trial on the bond, and when it seems sure that Antonio will die, Portia, disguised as a doctor of laws legally gets Antonio out of the situation and Shylock recieves harsh penalties. Antonio and Shylock, two similar businessmen of Venice, are viewed differently and are treated oppositely to heighten the drama of the play and mold a more interesting plot. Antonio and Shylock are both successful entrepreneurs in Venice but they both have different attitudes and experiences. When Antonio is asking Shylock for the loan he says, â€Å"Within these two months – that’s a month before this bond expires – I do expect, return of thrice times the value of this bond.† (1.3.169-170). Antonio and Shylock both are well off and successful businessmen. Antonio, being a man who is treats everyone nicely, lends his good name to Bassanio to woo Portia. Shylock on the other hand, could never do that and is a very greedy man who asks for three times the value of the loan. Also, Antonio is a risk taker and thinks things will always go the right way for him and his success will continue, which is shown when he accepts the high interest rate and the bizarre payment if the money isn’t received. Shylock handles his business straightforward and charges interest because it is his job, although being a very high amount and if it isn’t carried out, Shylock gets his payment of one pound of flesh. Shylock is depicted as the greedy businessman while Antonio is the nice man who tries his luck. Another way Antonio and Shylock are different is their religion based social status: Antonio is a Christian and Shylock is a Jew. Merchant Of Venice - Antonio And Shylock :: Free Merchant of Venice Essays William Shakespeare shows how two tradesmen can have completely different lives when others view them differently in the play The Merchant of Venice. In the play, Bassanio, Antonio’s friend, needs money to pursue his love. They seek a loan from Shylock, a Jewish moneylender in Antonio’s name. The contract is for three times the value of the bond in three months or else Shylock cuts off a pound of flesh from Antonio. While all this is happening, there are love plots going on. One of which is for Shylock’s daughter to elope with Lorenzo, a Christian. Later on, Antonio’s source of money, his ship, is reported sunken in the English Channel, dooming him to the loss of one pound of his flesh. There is a trial on the bond, and when it seems sure that Antonio will die, Portia, disguised as a doctor of laws legally gets Antonio out of the situation and Shylock recieves harsh penalties. Antonio and Shylock, two similar businessmen of Venice, are viewed differently and are treated oppositely to heighten the drama of the play and mold a more interesting plot. Antonio and Shylock are both successful entrepreneurs in Venice but they both have different attitudes and experiences. When Antonio is asking Shylock for the loan he says, â€Å"Within these two months – that’s a month before this bond expires – I do expect, return of thrice times the value of this bond.† (1.3.169-170). Antonio and Shylock both are well off and successful businessmen. Antonio, being a man who is treats everyone nicely, lends his good name to Bassanio to woo Portia. Shylock on the other hand, could never do that and is a very greedy man who asks for three times the value of the loan. Also, Antonio is a risk taker and thinks things will always go the right way for him and his success will continue, which is shown when he accepts the high interest rate and the bizarre payment if the money isn’t received. Shylock handles his business straightforward and charges interest because it is his job, although being a very high amount and if it isn’t carried out, Shylock gets his payment of one pound of flesh. Shylock is depicted as the greedy businessman while Antonio is the nice man who tries his luck. Another way Antonio and Shylock are different is their religion based social status: Antonio is a Christian and Shylock is a Jew.

Tuesday, September 17, 2019

Assess the Individual in a Health and Social Care Setting Essay

Compare and contrast the range and purpose of different forms of assessment The assessment process is the back bone to any package of care and it is vital that it is personal and appropriate to the individual concerned. Although studies have found that there is no singular theory or understanding as to what the purpose of assessment is, there are different approaches and forms of assessment carried out in health and social care. These different approaches can sometimes result in different outcomes. One method of assessment used is a holistic approach. To assess an individual in a holistic manner is to see that individual for more than just their functioning body, mental health state and lifestyle preferences. You have to look deeper into how all aspects of their life impact on each other, the reason certain factors influence them and what level of independence the individual has in each area that you are assessing. The benefits of a holistic assessment are that by taking into account the individual’s personal preferences and needs, you are ensuring that that individual remains in control and you are promoting their dignity and choice. The negatives being that it would not be appropriate for an individual with a diagnosis of dementia, or similar condition, to be assessed using this method. The reason for this is that an individual with advanced dementia would not always be in the position to delve into what factors affect their daily living in a positive or negative way. A popular method used in the care industry is the Taylor and Devine (1993) ‘basic helping cycle’. The basic care cycle consists of four different stages; Assess, Plan, Implement and Review. This is the method that is used most often as a template for the managers at Crosshands Home Services. On receiving a care package referral we then arrange a meeting with the individual, any advocate/family member and the appropriate professional, whether that is a social worker or an enablement worker. The initial assessment is put in place to ensure that we as an agency can complete the next stage which is to plan and prepare a care plan that is tailored to the individual’s needs, using feedback and information from the individual, any advocate/family member and the appropriate professional. Read more:Â  Assess Individual in Health Care The next stage is to implement the care package, ensuring all the care staffs involved are made aware of the individuals’ needs and preferences. After 6 weeks we would then review the care package, making any adjustments if required, and following that the care package would be reviewed again in 12 months. If for any reason there was a change to the individuals needs or situation then a review would be carried out at an earlier date in order to address the change. Research was carried out by ‘Smale et al (1993)’ which suggested three different models of assessment. One model was the ‘Questioning Model’ which suggests that the assessor leads the process by questioning the individual and developing a more ‘service led’ assessment. Another model is the ‘Procedural Model’. I believe this method would be used more commonly be social workers when means testing an individual for a suitable care package. The ‘Procedural Model’ is based on a set of criteria and checklists which a professional would carry out based on the needs of the individual. I do not feel that this method would be appropriate for setting up a care package in a domiciliary setting as it is not person centred friendly. The final model that was suggested was the ‘Exchange Model’. This model has a more person centred approach and is the model that is more commonly used by domiciliary care managers. The model focuses on the individual being the expert in their own care needs so that the assessor can use the information to develop a care plan that is person centred.

Monday, September 16, 2019

Do Rules Contribute to a persons happiness

Do Rules Contribute to a Persons Happiness? Rules and regulations. The two words which every child and even many adults hate to hear. When thinking of ‘rules' we think of something which stands in the way of our doing something we may want to. We immediately curse the rule, not thinking in what way it may be helping us. We fervently wish that it never existed, without really being able to comprehend what the world would be like without that rule.What we, as humans, fail to understand, is that rules are made primarily to help us. We may find them annoying, aggravating, and even completely pointless, but they generally help us feel safe and so, happy. Think of everything in our day to day life which we take for granted. Driving in a car, we expect people to stop for us at some point when at an intersection, that's because someone made traffic lights. Speed limits are another important rule which many people find extremely annoying.Think about this, f there were no road regulation s, would you feel comfortable driving? To all the people who see driving as the ultimate freedom, would you feel the same way if you were in constant fear of being killed? Of course not! The same goes for rules against murder, thievery, drugs, sexual abuse, the list never ends. It is because of all these rules that we are free to feel comfortable and happy in our lives. All the rules so far have been rules on an international scale, but even If we look at rules in our own souses they serve the same purpose.Personally, I would always get annoyed when my parents didn't let me have as much ‘Junk food' as I wanted. I would through tantrums and say that ‘now is the best time for me to eat Junk, while I'm still young! ‘ Now, when I think about It, I am extremely glad that my parents controlled me. If I had eaten too much, I could have had severe health Issues, which would have stopped me from doing so many things which I love doing today, Like playing sports, eating out and Just generally enjoying life.Today I am thankful for the rules set down by my parents, because they are a major reason for my happiness. Overall, I truly believe that rules and regulations are extremely Important to a persons happiness. They may not all help you out (though more often than not you may not see how they are helping you), but without them your life would not be nearly as enjoyable as It Is. As Sheldon Cooper (from The Big Bang Theory) says, Without rules, our entire world would descend Into Anarchy, and who wants that!

Sunday, September 15, 2019

Criminal Trends Essay

There is no question that crime has had and continues to hinder society. The criminal justice system is an intricate part of society and is essential that this system remains capable of adequately dealing with the latest crime trends. It was the establishment of the consistency with the Social Commission that the number or crimes should become a priority so that the facts and statistics developed can be readily available for use. When the first crimes were recorded over 60 years ago there findings showed crime trends in larceny, physical assaults, and homicide. As time progressed into today the studies conducted show an increase and broader concept to include organized crime from the mafias, organized crime involving gangs, trafficking of illegal drugs, and the illegal trafficking of humans. The interface between components of the criminal justice system and criminal justice connections with surrounding society is always changing. There are many components that affect society and criminal justice system. Components such as the increase of juvenile crimes, gun control, technology, and legalization of drugs, terrorism, and the list can continue. The two main components that have the largest effect from society to the criminal justice system are going to the increasing advancement of technology and the newly risen debate of gun control. These two components have the largest impact on society and the criminal justice system. Past trends that affected the criminal justice system: Society and the criminal justice system had their share of crime during the past. The crime that was handled during this time was difficult as it is today when something new occurs and has to be handled. Years ago there was not the forensics capabilities or the technology that we have today to solve murders and other crimes. The technological devices and advances that are available today were not present; therefore, requiring society and the criminal justice system do the best they each could do. The criminal justice system and its many agencies did not have bullet proof vests, GPS search systems, DNA/forensics, computers, Internet, biometric imagery, database information centers, telephones, walkie-talkies, and the list continues. Depending on how deep in the past things is observed or studied the criminal justice system and society had a different relationship than what is found today between the two. Society was not as quick to get involved with matters that did not concern them or their families; however, society had more of a hardcore respect for the criminal justice system especially, law enforcement. Technology is not the only component that affects the criminal justice system and society, gun laws and rights do so as well. In 1787, under The Bill of Rights in the second amendment was established allowing the American citizens to the â€Å"right to keep and bear arms† (Lee, 2012). Gun Control issues that are prevalent today were not seen as issues in the past and possibly could be seen differently in the future. There has been laws and policies created in the past that if they were not established the impact would be horrible for today’s criminal justice system. The list below complies to the past circumstances with gun control to make what society and the criminal justice system has developed recently. 1934 The National Firearms Act was established to help maintain, control, and tax firearms used during the prohibition era (Lee, 2012). * 1938 The Federal Firearms Act was established to begin the process of record keeping and acquiring a licensing for sellers (Lee, 2012). * 1968 The Gun Control Act was established to prohibit anyone from purchasing a long gun through the postal service, prohibits convicted felons, drug users, and the mental ill from obtaining the right to carry a firearm (Lee, 2012). 1990 The Crime Control Act was created to make certain areas gun-free zones, such locations that of a school area (Lee, 2012). The fact that these actions created and maintain from the past a foundation that we use today when dealing with any form of gun violence or gun requirement. In past people could carry a gun inside facilities, own whatever make or model that was present at the time, children knew how to shoot, children could carry a gun (western days); however, with the incidents that occurred developed the impact that we carry on today in society. The truth behind every act or law there is a reason to why it was created, established, and enforced. Recent and present trends that affecting the criminal justice system: According to Cetron and Davis, â€Å"the exponential rate at which technology is changing directly affecting policing today. While it offers new tools for officers, it is also providing extremely lucratively and easy means of criminal activity. † The criminal justice system and citizens are both affected by this change. Technology has progressed so rapidly over the past decade alone that criminals are committing crimes internationally, and this is making the job of law enforcement agencies even more difficult, more time consuming, and more dangerous. The criminal justice system does still have corruption from different agencies, especially the law enforcement. Today, technological advancements, and crime control relate to investigator and investigations may not significantly decrease violent crimes, only time will tell if technology advancements are hindering the criminal justice system and the privacy that Americans so desire nowadays (Muraskin, 2009). One of the most important technological creations used today is smartphones. Smartphones are equipped with cameras to take live and still shots, voice recordings, application downloads, file storage, area to link other equipment into the phone, and the list continues. The second most important technological device that has been created and used today by society and members of the criminal justice system with the different agencies is The Global Positioning System or GPS. The second trend that has taken toll recently with society and the criminal justice system and its many agencies is gun control. The horrible incident that occurred at Sandy Hook elementary school where innocent children lost their lives started a national conversation on the revision of gun control policies and acts presently in effect (Greathouse, 2013). Issues such as assault weapons bans, ammunition access, deterring the use of guns by criminals and the potentially violent, and the influence of violent media are in question because of this horrible attack. The role of law enforcement and the courts in reducing further incidents of gun violence has also been at the forefront of the hgun violence discussion. There have been efforts to impose harsher sentences for gun crimes, producing stark difference in the federal versus state or local penalties in some areas† (Goldberger, 2008). Society has mixed emotions of the possible increments that could affect their ability to maintain their second amendment right. The main argument with most individuals in society is that guns don’t kill people, but people kill people. The possibility of divided society is strong if society loses their rights to â€Å"bear arms†, and on the other hand member of the criminal justice system who are also a part of society when off duty will have to handle the aspect of a â€Å"twin edged sword. † Future trends that will affect the criminal justice system: Attorney General Eric Holder stated, â€Å"The globalization of criminal networks and advances in technology have made international criminal organizations a significant threat to the safety and security of our nation. Preparing for the future in the criminal justice system with its many agencies and society is a hit and miss. The technology possibilities are endless. The new crimes that can occur or the possibility of terrorism happening again in this country are always strong. According to Nancy M. Ritter, â€Å" There is no question that terrorism, the growth of multicultural populations, massive migration, upheavals in age composition demographics, technological developments, and globalization in the future will affect the criminal justice system† (Ritter, 2004). Society is ever changing with the flow of the economy and the different cultures and nationalities that are present. It is a fact that we cannot control what has happened in the past, but we do have some control on what happens in the future. Society and the criminal justice system with its many agencies needs to develop an understanding and a respect for each other immediately so that when situations occur that no one in particular is involved respect for the decision and outcome are acceptable. Value of the criminal justice system in a changing society: People of society want to feel safe in our communities no matter where we are or what we are doing. There should not by any shape or form of reasoning to why individuals should not feel safe within their own homes, communities, and neighborhoods. People should be able to arise every day without having to look around and make sure if it is safe to leave their domain. Individuals should be able to walk down the street without having to look constantly over his or her shoulders in fear of harm. The relationship between the criminal justice system and society is not a complex relationship. Society is involved in many steps, policies, and procedures within the criminal justice system. Society helps with the elections of officials and also has a possible role in law making. Individuals from society help in the courtroom proceedings as well as they are members of a jury. According to Muraskin and Roberts, who states that â€Å"society is a part of the criminal justice system and its protocol such as the prevention of crime, policy making, and witnesses during court cases and jury members during courtroom proceedings. The criminal justice system is establish with law enforcement help enforce the laws of the â€Å"land† and protect the individuals in society. Society and the criminal justice system has had their differences that changed the perception and amount of respect some individuals had toward the system, but strive forward the past has to be let gone. Soceity and the criminal justice system has to work to work together to maintain a safe and stable living en vironment for everyone. The value of the criminal justice system in a changing society is irrefutable. Society would be nowhere if there was not a crimirnal justice system. If the criminals justice system did not exist, and this country would be taken over by organized crime, terrorst groups, by drugs, identity theft, prostitution, human trafficking, and the list continues. The system gives society their rights, what keeps them safe and what upholds the law. Our societies are changing daily with the increasing illegal immigrants who are located within our borders. The increaseing amount of illegal immigrants develops differences in races, cultures, beliefs, and ideology. The crimnal justice system keeps many of these things from taking over our nation and witout them there is no hope. â€Å"Predictions and visions of the furture are makred by challegnges, expectatons, advaced preparedness, and techological developments. Crminal justice professionals are encountering enormous challenes and organizational changes, Whether or not the technologically advnaced changes in criminal justice investgations and crime control will contnue to significantly reduce violent crime rates remains to be seen. But, technological and social developments as well as policy changes offer much promises for the future† (Muraskin, 2009). Conclusion: The crimes that society has had to contend within the past still hinder the criminal justice system along with the new elements of crime. Crime trends are extending beyond the border of the United States and are a challenge globally. Cybercrimes are on the rise as society becomes more dependent upon electronic data gadgets and the Internet. The criminal justice system of today is believed by many not to be capable of remaining effective without change. The current methods of dealing with criminals and their crimes are ineffective toward the current crime trends. This will require changes in the way the grand jury operates on an everyday basis. The most practical effective method for the grand jury would be to meet and discuss current crimes and punishments without an authoritarian disposition. The ongoing fact is that the criminal justice system has and will contour to change. Criminal will come up with new and clever ways to commit their crimes and the criminal justice system has to come up with ways to combat these advancements. Society will always have criminals therefore making the constant need for the criminal justice system and all the agencies involved. The criminal justice system will always be an ever evolving field within society. Society changes on a regular basis and with change from within society develops the technological needs are established. In other words, as society changes the needs that it takes to be more productive is altered to fit the present situation. The barriers that come along can affect how the criminal justice system interprets on how to control and maintain the situation. The fundamental basis of the criminal justice system is to protect and serve the community. The criminal justice system has to stay ahead of the game, especially the changes that occur in society. Crime trends may not last; therefore, receiving a fundamental explanation of how long crime trends will last is anyone’s guess because different trends have no set time frame to how long they are going last. Trends whether what nature they are come and go and other develop in another ones place. Changes over time in crime trends and patterns have significant consequences, which affect the criminal justice system as well as to the essential departments because if one were to look at â€Å"such areas as health, housing, and employment consistent trends ad patterns emerge, whereas America lacks the information and comprehensive research on crime trends† (Goldberger, 2008).

Saturday, September 14, 2019

Importance of Computer in Schools Essay

Tara Dodrill began writing professionally in 1990. She is a travel writer and photographer working for print and online media, primarily covering Florida, ecotourism and off-the-beaten-path destinations. Her writing credits include RUMBUM, Yahoo News, Visit South magazine,and North Carolina Coastal Guide. She studied journalism and education at Ohio University and real estate at Hondros College. Computer classes in schools are important to a well-rounded education. Students are instructed on the basics of computer use as early as kindergarten. Educational software, often presented in a game-like format, entertains younger students while they learn key concepts. ? Technology Skills * The importance of computer study in schools goes beyond the reinforcement of classroom subjects and remedial assistance. Nearly all students will be faced with the need for technology skills when they attend college or enter the workforce. Keyboarding Classes * Keyboarding classes in elementary schools have replaced the old-fashioned typing classes once offered in high schools. Students learn at a young age how to use computers to generate reports, type essays and research homework assignments. * Career Preparation * Computer skills learned in middle school and high school will benefit students during higher education courses and their careers. Students as young as 12 learn how to create Power Point presentations, video projects and photo slideshows. Online Access * By learning how to use computers, students even in low-income areas have access to the world at large. Online learning courses, which were once a rarity at colleges, now comprise a large portion of many schools’ course catalogs. Adult Learners * Students who are introduced to computer courses at an early age adapt quickly to advances in technology, and typically do not fear additional training and new concepts as adult learners. Effect of Science and technology in our lives As what I understand about how Science and Technology affects our lives, That there are advantages and disadvantages. The Advantages are, it makes our lives simple by using equipment that can easily finish and do well the work or job. We can save more time and energy so that we can perform and do our other job. We can now easily communicate our love ones and relatives by using cellphone and internet, it can connect us even they are in the other part of the world and then with digital camera, we can see them just like they are in front of us. Technology now can give us more information about what are happening around the world that help us to get aware and prepare for disaster and calamity that might happen in our country or in our place. Science and Technology can cure our diseases, provide us shelter and foods for crowd people. Most of the people think that there are more advantages of science and technology as compare to the disadvantages. The major advantage of science and technology is that it has made our lives easier like invention of technology has decreased the manual work. The use of technology in agriculture has increased our productivity. Doing work at workplaces is easier because of invention of computers and notebooks. Development of technology in kitchens, beauty parlors, workplace, research labs and in all fields of life has become the necessity. Now we can study and understand our history,culture and society and by the help of Science and Technology we can share our stories of whats happening in our life, what we see and what we discover to by this way we can also help the children of the next generation. The major advantage of technology and science is to assist mankind in living well and more easily and in better health. There is also disadvantages on Science and Technology Many years comes our atmosphere slowly destroy because of the air pollution that came from the factory and it can cause Green House Effect (GHE) it is a process by which thermal radiation from a planetary surface is absorbed by atmospheric greenhouse gasses and is re-radiated in all directions. And it is harm for the people. Science and Technology make people lazy because people just depend on it and not do there work well. It will increased the anxiety of our lives, when technology goes in the wrong hand it can have an negative impact in our society it can create cyber crime, hacking, stealing of personal information and pornography websites. It also gives opportunities to the terrorist to make crime like bombing. As technology develops we forget our traditions style of living. it simply destroying our life styles. It also destroying our nature because of illegal logging, and mining and others, this is the cause of landslide and flood that can kill many people because nature cant stop it anymore.

Mr. David O’Brien

I will look at the key aspects that are present in the piece and how they relate to the question asked and the reliability of the source provided. The three aspects that I will look for are the evidence of economic pressure and how this drove people to fight against the poor law and rebel against the middle class and the oligarchs from 1838. The political movement within Chartism that spawned the general convention as well as the formation of the national charter association, and eventually put forward the petition in 1842. And the cultural community that was very inclusive for its time, letting people from outside England and also other ethnicities like William Cuffay have as much of a say as anyone else within the movement. I will then conclude by choosing what I think is the main catalyst for support. Part 2 What evidence is there in the extract above of the three explanations for Chartism’s support that you learned about in the chapter, and which, if any, is stressed most strongly by the speaker? In this essay I will show evidence from the speech provided, of economic pressure, political movement as well as the inclusive cultural community present within the Chartist Movement that helped Chartism gain a following, and reference other sources to support my discussion. And explain which aspect I think the speaker emphasises more strongly than the others. The primary source provided is the speech that was said on July 6, 1839, and was heard by as many as 12,000 people. It was taken from a report in the Northern Star a Chartist publication. I don’t believe this source to be particularly reliable due to the absence of the speaker’s name and that it is from another article. Certain things could be elaborated due to the bias nature of the publication. The speaker makes many references to the economic conditions of the times. One of the most important â€Å"These evils chiefly of a political and social cast arise from one source class legislation†. Class legislation refers to the laws that chartist’s thought were put in place to defend the rich. One of these laws was the â€Å"poor law†. This law enacted in 1834 by parliament, tried to push the able bodied poor into workhouses to receive money and aid from the government if they were unemployed. These workhouses would provide lodging and food but had a social stigma attached to them. This was not popular among the chartists or the general population alike. Another extract highlights the hard life of the working class during the economic down turn â€Å"while destruction in horrid form stalks though street, lane and thoroughfare, in all its sickening outlines, all of its appalling aggravations, all its emaciated frames, its haggard features, its ragged clothing, its insufficiency of food, its skeleton like, ghastly aspect, followed in the rear by heart rendering cries insufferable despair, the bursting heart, the muffle voice of burning inward madness, the infuriated rage of desperation, the sad habiliments of mourning, and the toll of the death-bell over the famish victim of monopoly, closes the scene† This is in contrast to the lifestyle of the Clergy, Aristocracy and the middle classes of the period. As many working class men we not allowed to vote, had laws passed that directly affected them whilst living in conditions that were abysmal made for strong resentment. The speaker adds â€Å"with this nation suffering its liberty and rights to be remorselessly trampled upon by murderous factions, jobbers and commercial blood sucking vampires, the rich unnaturally elevated above the proper spheres of the mortal man, the poor crushed beneath the alpine mountain weight of taxation, misrule and oppression†. Adding to this resentment was the â€Å"Peterloo massacre† where Chartist’s died at the hands of British Army cavalry during a protest. Going back to other comments made by the speaker â€Å"Honourable gentlemen, I mean by this name the working class only† Highlighting the feeling between the working class and other casts, as very much divided. Extreme conditions and inequality existed throughout economic downturn and from 1837 to 1842 Britain was experiencing a sharp recession. 1839 was a â€Å"year of mass meetings† and there was a common ground among working class males that the idea of universal suffrage should be implemented, as they did not feel adequately represented in parliament. There is a strong political message for reform. Swell the numbers of the patriot throng which have sworn by him that liveth for ever, that they will have the peoples charter, or they will die in the struggle. (Bravo, and We will)† The movement formed a more organise d front just after this speech on 20 July 1840 with the formation of the National Charter Association (NSA). Braches organised meetings and distributed free press. Mass meeting like this speech and the NSA were pivotal in the creation of the second charter that was signed by 3,317,752 people supporting Universal suffrage and other points mentioned in the charter. The Chartist Movement was very inclusive, as at this time racism and discrimination were rife. Some examples of this in the higher leadership are Fergus O’Connor an Irishman of noble standing and William Cuffay the son of a freed black slave and well as being born with a deformed lower back and leg. â€Å"Mr Chairman and fellow working men, brethren of the human race†, an example of the camaraderie of the working class as a whole. The economic conditions and lack of representation are the main points in this speech. They led to the common support of the chartist cause, as support would increase in times of economic difficulty. Chartist’s adapted to create a political movement out of which, they had a voice. I conclude that Chartism was the catalyst for change and one of the main reasons we live in a democratic society today.

Friday, September 13, 2019

Knife crime in uk Essay Example | Topics and Well Written Essays - 1750 words

Knife crime in uk - Essay Example The knife crimes happening through out UK has increased to alarming levels and a research done by British Crime Survey clearly illustrated that the number of knife crimes happening in the UK has reached the level of 130000 offences annually. Similarly to curb out these crimes different techniques are being applied by the government of Britain. This article would further revolve around the topic of knife crimes in the UK and would evolve with a detailed conclusion as to how much alarming the situation is and what is being done by the government accordingly. Different laws have been passed out by the UK legislation through out the 19th century to limit the use of knives. These laws have a basic aim of reducing the knife crimes happening through UK. They prohibit the sale, carrying, use and also production of these tools. The Prevention of Crime Act in 1953 clearly illustrates that any object which may cause harm to any individual if used is an offensive weapon. Similarly keeping this Act in mind new acts have been placed by the government which declares knife as an offensive weapon and its use on any individual should be widely prohibited. The current act of Violent Crime Reduction 2006 clearly states that knives should not be carried in public places or schools without any genuine excuse. However folding knives which have a blade of less than three inches are still allowed to be carried in the UK. Knives which are banned in UK include gravity, flick and samurai swords. The new act of 2006 has increased the sentence from two years, for carrying a knife in a public place, to a maximum of 4 years. The laws for the carrying and using of knives are eligible on the teenagers also. As recently a teenager was sentenced to life imprisonment was stabbing another teenager with a knife. Furthermore the buying of knives is prohibited to teenagers who are younger than 18 through this new act. The teachers and police have been granted the power to check any individual for the possession of knives. Cases of Knife Crimes There are many horrible and terrifying cases which are enough to threaten the whole society. In UK, knife crimes are increasing day by day. It is easier to carry a knife as people think it is not as harmful as a gun. However, the mentioned cases would provide clear evidence that holding a knife is equally harmful and dangerous as holding a gun or other weapon. These weapons should not be used to harm people but for the defense f the country. Those who were expected to hold books and pens and concentrate on their studies for the bright future of their country are instead holding weapons and destroying the image of UK. A 16 year old teenager murdered Martin Dinnegan in June 2007. Such a violent behavior from the youth is tragic and shows that the country is moving towards horrible future. The incident happened as a result of 'dirty looks' passed on by two groups on each other in Holloway. On such a minor issue Martin Dinnegan lost his life in the age of 14. As Dinnegan realized the i ntentions of Chin, he started to run away from them and screamed for help. Regardless of his continuous cry Chin stabbed him to death. The case of Martin Dinnegan was observed by the judge Brian Barker. According to him, the attack was planned and intentional as a revenge of rivalry. The attack showed an inhuman behavior and the selfish and severe attitude of a person

Thursday, September 12, 2019

Math 157 course Essay Example | Topics and Well Written Essays - 750 words

Math 157 course - Essay Example This research will begin with the statement that mathematics is a fundamental tool that is used to solve puzzles occurring in nature. Thus teaching mathematics not only provided learners with a useful concept but also problem-solving strategies. Data analysis is a fundamental concept that we covered in the first week through the course. This involves processes used to inspect, clean and model data to derive useful information.   In this context, data refers to raw information obtained from the field or a real experiment. Real data is more complex than data used for class practice. Complexities of real data required us to apply data analysis software such as SPSS and Stata. Moreover, data collection is a costly procedure and, therefore, statisticians require the knowledge of probability. The concept of probability explains the outcomes of random events and the likelihood of certain occurrences. These concepts are useful in determining samples in a field study or a survey. The concep ts of probability are established on the existence of a sample space consisting of possible outcomes and ratios that represent each possibility. For example, a coin tossing experiment has two outcomes and a sample space sample S = {H, T}, with P (H) =P (T) =  ½. In the third, fourth and fifth week we covered the concepts of geometry. Geometry provides essential mathematical concepts that are used to describe the size, shape and relative position of an object.

Wednesday, September 11, 2019

In Doctor Strangelove, there was a great deal of emphasis placed upon Essay

In Doctor Strangelove, there was a great deal of emphasis placed upon the - Essay Example In 1964, Herbert Marcuse introduced to the word his radical masterpiece entitled One-Dimensional Man. He unbolted an impressive question at the opening of his book in which he inquired about the irony of the very function of the atomic catastrophe; he stipulated that while the annihilation of humankind is imminent due to the escalating inventions of weapons of mass destruction, these warfare technologies are the primary protectors of the power that created the danger. Recently, Marcuse budged his attention from thermonuclear destruction into pop culture or the production of cultural representations which are largely shown in consumer products. Marcuse dedicated much of his thinking time in calculating the upshots of technological advancement today. He stalwartly judged that empires generated technological stratagems to finally liberate an individual from excruciating labor and lack of knowledge while at the same time making use of these technologies to outwit and even outlast them. T he dilemma of this new development is the very existence of agencies of cultural diffusion such as the media and the information machineries which supposed to be a guiding light towards functional responsiveness and yet serve to preserve the balance or status quo. The postmodern world which is characterized by the buying and selling of not only goods and services, but also in massive extent information, lay claim to people’s mind fabricating a nostalgia of self-sufficing exploitation. A one-dimensional man dwells in the contemporary world who is actually a pleased, innovative being but then devoid of the immaterial understanding of his universe which is in reality governed by discourse and action. He will become a mainstay in the comfort zone he weaved with the help of modern artifacts and will never take the possibility of dallying outside the mirage provided to